WHAT have YOU been doing Today??

[Capttrae]

Drove down and got back on the boat. I kind of like 28 on 7 off, every check is a big check, just the right amount of time at work not too much time at home so not really enough time off the boat for things to go completely to crap while I’m gone.

 

[KYBOY]

Working on a 66’ model Lincoln idealarc. Mechanically sound, checked it over with a meter and ran some test Rods. Now cleaning/painting sheet metal, switches and contacts..

 

[JR in KY]

Working on a 66’ model Lincoln idealarc. Mechanically sound, checked it over with a meter and ran some test Rods. Now cleaning/painting sheet metal, switches and contacts..
View attachment 109934 View attachment 109935 View attachment 109936 View attachment 109961 View attachment 109962 View attachment 109963 View attachment 109964

I have one just like it about same age..maybe '73.
That little Fan in the back Quit once and I Think I had to put another roll pin thru the fan shaft.

 

[JR in KY]

Finishing up loading a few hundred 5.56 today. Brass Trimmed, primer pocket got the Crimp removed (Ground out), Cleaned, Reprimed, Dropped Powder (TAC) 25.4g. And seated a bullet in the case. Brass Trimming is necessary for loading for AR 15s...the chambers are large and the brass grows quickly.
If it is a bit Long, it will Fire but may stovepipe the fired case.

 

[bondhu]

LMAO that's the welder we used in agi in 85. Most of the ones you see around here came from the high school. They would change them out every couple years and being agi/FFA farmers got first debs.
There good stick welders but they sure make the squirrel in the meter box work over time.

 

[flyingnectar]

Heading back to the field to mill the lumber for a barn pattern. Gonna be a nice day!

 

[Capttrae]

Headed to Gulfport to get another boat through ABS and FMEA inspection. That’ll make 2 boats I’ve pulled out in as many months. I’m fixin to go romp on this one. Same boat I ran for 7-8 years. Lots of power on a lightweight boat. 4- Cat 3512C for mains Cat c-9’s for gens, 4 18” Hamilton water jets. She loud and proud.

 

[flyingnectar]

Sawmill portable working are tail off

 

[OLE RASPY]

Mowed my lawn (hit a pile of dog shit from my neighbors dog, pissed me off) and put down some 7-20-20 fertilizer.
Did a few odd jobs around the house.
Watching a few basketball games and sipping on some bourbon a just decided to have a beer.

Pisses me off when that happens. I could kill every dog in the country when that that happens. Lolololol

 

[KYBOY]

LMAO that's the welder we used in agi in 85. Most of the ones you see around here came from the high school. They would change them out every couple years and being agi/FFA farmers got first debs.
There good stick welders but they sure make the squirrel in the meter box work over time.

our school has them too,LOL.. They are still plenty of them because they were almost un-killable. Im still gonna buy the bigger 300 but the price on this one was so good i couldnt pass it up..

 

[baknblack]

Recovering from covid. My wife works at a medical office and brought us home a nice case of covid. I've been sick for 4 days but yesterday was the worst. My head hurt so bad I could hardly move or stand the light. Spent all day yesterday just laying around and slept 12 hours last night. Sweating a lot today and feeling a lot better.
First time I got it was early 20 and that one was worse than this time. I did get the 2 phizer shots in 20 but, decided against anymore mrna shots. If I were not pretty healthy I could see how it could go to pneumonia pretty easily.
It's still out there and it ain't playing!

 

[mcbuck58]

Recovering from covid. My wife works at a medical office and brought us home a nice case of covid. I've been sick for 4 days but yesterday was the worst. My head hurt so bad I could hardly move or stand the light. Spent all day yesterday just laying around and slept 12 hours last night. Sweating a lot today and feeling a lot better.
First time I got it was early 20 and that one was worse than this time. I did get the 2 phizer shots in 20 but, decided against anymore mrna shots. If I were not pretty healthy I could see how it could go to pneumonia pretty easily.
It's still out there and it ain't playing!

Hope you all feel better soon

 

[Feedman]

Was in Louisville setting up our booth for the Fram Machinery Show.
We are in the West Wing Pavilion

 

[Drahts]

Still working on Momma's Master Bath. She decided I needed to build her Mirror frames for in there. Had a big hang up with some electrical I had to move for the mirrors to fit. Idiot that built the house didn't conform to any normal building processes. Interior walls you never know when or where a stud will be but you can be damn sure one will be where there is no reason for one or and never one where one should be or you need one!

 

[bigbonner]

Was in Louisville setting up our booth for the Fram Machinery Show.
We are in the West Wing Pavilion

I have been there one time and would like to go back again.
My John Deere tractor was at that show years ago.